Cedar or the top Mahogany for the back Mahogany for the sides Neck cut from a mahogany snooker-table leg Neck cut out Sound hole rosette inlay Back bracing Top bracing Sides assembly Top glued on The body Back of the body End flash Maple corner reinforcement Mahogany pickup support Positioning the pickup Preliminary neck carving Tapered dovetail mortise in the body Tapered dovetail on the end of the neck Rosewood for the bridge, headstock veneer & fingerboard. Maple for the trussed fillet. Truss rod, groove & fillet. Rosewood bridge carved Rosewood on the headstock Trapezoid inlays on the fingerboard Doing the headstock inlays Fitting the frets Indian ink on the top LP vinyl scratch plate Grover tuners Humbucker installed Strings on
